For non-USA orders, call 530-243-2200; 800-237-3526 or email us
Call UsCall us at (530) 243-2200

Scribing and Cleaving Samples Into 1 mm Wide Strips

Some analytical instruments can only accept small samples and with limited height. Sample preparation by scribing and cleaving is often the best solution. LatticeGear’s scribing and cleaving tools are used to prepare narrow samples for high resolution SEM and STEM. The video shows two methods of preparing 1 mm wide strips. One narrow sample was prepared by making a short scribe using a pen style scriber on the edge of the sample and cleaving with Small Sample Pliers . The second example was scribed using the FlipScribe┬« and cleaved using the Small Sample Pliers. The FlipScribe┬« creates a straight scribe on the backside of the sample. This is the preferred method when the sample surface needs to be clean, free of particles and damage from the scribing process.

Leave a comment

Your email address will not be published. Required fields are marked *